RSS Feed
Knowledgebase : Custom Services
Please view Bullet Mold Design Assistance Sheet [http://www.leeprecision.com/cgi-data/instruct/MoldDesignAssistance.pdf] We make Custom Bullet Molds to your specifications for a $175 setup and tooling fee plus the cost of the mold. When we receive ...
The standard Collet die for the parent cartridge should work, provided that the base to neck/shoulder intersection dimension has not changed. Most Ackley Improved cartridges have less body taper, and a steeper shoulder angle, but the distance from th...
The Bullet Seater plug that comes with the die set is as close to generic as we can make it. If you find that the bullet seater plug deforms the nose of the bullet you are trying to seat, we can make a custom bullet seater plug to fit your bullet....
Custom case length gauges can be made for cartridges that fit an existing shell holder. We will need to know the desired trim length, and either the bullet diameter or a couple sized sample cases. The cost for this service is $15.00 plus shipping. ...
We can adjust your 22 Hornet Collet Necksizing Die to work with the 22 K Hornet. The cost for this service is $30.00 + return shipping. Include your die and a sample fired case.
The Very Limited Production PaceSetter 280 Ackley dies are for the original 280 Ackley Improved. The Lee 280 Ackley Improved full length sizing die has a .014" longer head space than the SAAMI 280 Ackley Improved specification. Cases sized in a Lee d...
Standard sizing dies are .329 inch. Undersized sizing dies are available for the 32 ACP, they are .326 inch and cost $27.98 + shipping and handling. Order directly from the factory: (262) 673-3075 or https://leeprecision.com/product.php?productid=4...
The standard 45/70 Factory Crimp Die will not work for Hornady LEVERevolution brass. The Factory Crimp Die is case length specific and crimps on the last .040" of the case at the case mouth. The Factory Crimp Die needs to be shortened in order to r...
Most of the time the parent cartridge factory crimp dies does work, but sometimes the shoulder has been pushed back more. If this should be the case, you are welcome to return the Factory Crimp Die and a sample case to the factory and we will modify ...
The bullet seating plug that comes with the die set is as close to generic as we can make it. If you find that the bullet seating plug deforms the nose of the bullet, or will not seat it to the proper depth, we can make a custom bullet seating plug t...
The bullet sizing dies are intended to size molded lead bullets. Jacketed bullets can be sized, but it is necessary to use LEE Resizing Lubricant, not Liquid Alox bullet lubricant. * Custom Lube & Size kits are $38.00 plus shipping. * Maximum ...
STANDARD 7/8 X 14 THREAD COLLET NECKSIZING DIES A Custom Collet Die set consists of the Collet Neck sizing die, the Easy Adjust Dead Length Bullet Seating die and shell holder. The cost is $70.00 per set plus $6.00 for Shipping & Handling. Maximum ...
RIFLE FACTORY CRIMP DIE 7/8 X 14" THREAD The collet-type Factory crimp die can be made for a wide variety of cartridges. Most cartridges will fit into the 7/8x14 thread die body. If your cartridge falls within the following parameters it will fit t...
Flaring tool is used to expand the case mouth of cast bullets without shaving the lead. Jacketed bullets do not require a flaring tool. If your Classic Lee Loader didn't ship with a flaring tool, we can custom make one for you. The cost is $8.00 + ...
For custom full length die sets, we ask for payment in advance, five fired cases, and three sample bullets for testing purposes. Current lead time for Custom Full Length Die sets is around 12 weeks. We will waive the Set Up charge if 25 or more of t...
Most expanders are designed to .001 to .002" smaller than the bullet. For example the 577/450 Martini Henry dies ship with a .468 expander for a .470 bullet. We can make a custom over sized expander if you send in a sample bullet. Cost is $30.00 + ...
While we get many requests, Lee Precision does not offer any custom work for its Classic Lee Loader line.
If you would like to order an Undersized Mandrel, you will need to call us to place the order. The cost would be $5.00 plus shipping and the current lead time is around 6 weeks. phone: 262-673-3075